Page 71 - Seachoice Catalog_042014_Neat

ANCHORING 63 GALVANIZED WIRE ROPE THIMBLE THREADED ROD Wire rope style thimbles. Meets federal specs. For use with Seachoice lifting adapter FFT- 276b type 2. 43331 at 2 per card. 43341 plate (30201) and choice of lifting eyes & 43351 single packed. (30231 & 30241). 304 Stainless steel. Item # Size Case 30190 5 /8"-11 x 36" L 10 (Bulk) Item # Size Case Galvanized 43331 3 /8" 12 (Pr.) LIFTING EYE WITHOUT CLEAT 43341 1 /2" 1 2 Stainless Steel 43351 5 /8" 1 2 Tapped for 5 /8" threaded connecting rod. Maximum vertical load 3000 lbs. If used for overhead lifting, both Seachoice Galvanized - Bulk lifting adapter plate (30201) and threaded rod (30190) 43330 3 /8" 1 (Bulk) must be properly installed. 43340 1 /2" 1 (Bulk) 43350 5 /8" 1 (Bulk) Item # Eye Case 30231 1 1 /2" 1 0 LIFTING ADAPTER PLATE Adapter plate with 5 /8" right hand threaded AUTOMATIC FENDER ADJUSTER tapping pinion. For use with Seachoice For Use with Wooden Rails and Pipe Rails lifting eyes (30231, 30241) when overhead Makes placing fenders easy. Eliminates tying/untying fender lines. Instant lifting is required. self locking action works automatically to raise and lower the fender and hold it securely in place. White vinyl strap w/stainless steel hardware. Snaps around rails. Accommodates up to 1 /2" diameter line. Item # Material Fits Case 30201 304 Stainless Steel 1 1 /4" ID Eyes 12 FENDER LOCK Item # Case 79101 12 Stainless Steel Eye is to be permanently attached to fender line. 2 per card. 30131 30121 PULL UP CLEAT 316 Cast Stainless Steel Item # Description Eye Flange Fastener Case Cleat recesses flush to deck. Four countersunk holes 30121 Lock 3 /8" ID 1 1 /2" # 8 1 2 for four fasteners (fasteners not included). Easy to 30131 Spare Eye Only 3 /8" - - 1 2 install. Needs 3 1 /2" below deck clearance. Item # Size Fastener Case 30061 4 1 /4" #10 12 TIE DOWN CLEAT 30071 6" 1 /4" 1 2 Chrome Plated Zinc Item # Size Base Fastener Case 30351 4 7 /16" L x 7 /8" H 1 9 /16" L #10 12 PULL UP CLEAT WITH STUDS 316 Stainless Steel BLACK PLASTIC CLEAT Streamline design Durable and non-corrosive. 30800 30820 Item # Size Stud Case 30041 4 1 /2" 1 /4"-20 thread 6 30051 6" 3 /8"-16 thread 6 30840 30860 LIFTING RING / CLEAT Item # Size Line Size Fastener Case 316 Stainless Steel 30800 4 1 /2" L Up To 5 /16" 3 /16" 1 (Bulk) Base diameter: 2" Height: 2". For threaded rod size 30801 4 1 /2" L Up To 5 /16" 3 /16" 12 5 /8"-11. Maximum vertical load 4000 lbs. Fasten with 30820 6" L Up To 7 /16" 1 /4" 1 (Bulk) #10 screws. If used for overhead lifting, Seachoice 30821 6" L Up To 7 /16" 1 /4" 12 lifting adapter plate (30201) and threaded rod 30840 8" L Up To 5 /8" 5 /16" 1 (Bulk) (30190) must be properly installed. 30841 8" L Up To 5 /8" 5 /16" 12 Item # Size Eye Case 30860 10" L Up To 1" 5 /16" 1 (Bulk) 30241 6" x 2" 1 1 /8" dia. 10 30861 10" L Up To 1" 5 /16" 12