KEY: BLUE ITEM # = NEW | RED ITEM # = HAZARDOUS | v OVERSIZE | * WHILE SUPPLIES LAST 97 ENGINE ACCESSORIES Item# OEM# I.D. O.D. Length 50-23691 MPI# 132-0126 1/ 2" 4/ 5" 50' 50-23693 MPI# 132-0586 5/ 8" 15/ 15" 50' 50-23694 MPI# 132-0346 3/ 4" 11/ 9" 50' Used mainly for engine water, water heater, air conditioning circulation, icebox, sink and shower drain lines. Heavy EPDM tube and cover reinforced with high-strength polyester yarn. Resistant to mild chemicals, heat, cold, ozone and sea water. Temperature range -40°F to 210°F (-40°C to 99°C). HEAVY-DUTY WATER HEATER HOSE - 132 SERIES Item# OEM# I.D. O.D. Length 50-21233 MPI# 315-0566 5/ 16" 1/ 2" 50' 50-21223 MPI# 315-0386 3/ 8" 5/ 8" 50' 50-21220 MPI# 315-0380 5/ 8" 5/ 8" 250' 50-23701 MPI# 315-0585 5/ 8" 7/ 8" 25' 50-23703 MPI# 315-0586 5/ 8" 7/ 8" 50' Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C). For use in non-enclosed engine compartments. TYPE B1/B2 FUEL FEED & VENT HOSE - 315 SERIES Item# OEM# I.D. O.D. Length 50-23704 MPI# 350-0583 5/ 8" 1" 10' 50-23706 MPI# 350-0585 5/ 8" 1" 25' 50-23707 MPI# 350-0586 5/ 8" 1" 50' Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility—4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C). TYPE A1 FUEL TANK AND FEED HOSE - 350 SERIES Item# OEM# I.D. O.D. Length 50-23711 MPI# 350-1123 11/ 2" 17/ 8" 10' 50-23712 MPI# 350-1124 11/ 2" 17/ 8" 121/ 2' 50-23713 MPI# 350-1125 11/ 2" 17/ 8" 25' 50-23714 MPI# 350-1126 11/ 2" 17/ 8" 50' 50-23715 MPI# 350-2003 2" 23/ 8" 10' 50-23716 MPI# 350-2004 2" 23/ 8" 121/ 2' Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.—4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C). TYPE A2 HARDWALL SINGLE WIRE FUEL TANK FILL HOSE - 350 SERIES Item# OEM# I.D. O.D. Length 50-23796 MPI# 352-1123 11/ 2" 17/ 8" 10' 50-23797 MPI# 352-2003 2" 23/ 8" 10' Premium quality marine fire-retardant fuel fill hose for use with self-draining ABYC fuel fill systems within an enclosed engine compartment. Works with all marine fuels including gasoline, ethanol, diesel, bio diesel, and alcohol enhanced (CE10) fuels. Reinforced with helical wire between plies of nylon spiral cord providing strength, flexibility, and bend radius—4-ply construction. It has maximum resistance to fuels, weather, UV, and ozone. Meets or exceeds all requirements to: ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33 and NMMA/CE Type accepted standards. Temperature range: -20°F to 212°F (-28°C to 100°C). TYPE A2-CE CORRUGATED FUEL TANK FILL HOSE (DOUBLE WIRE) - 352 SERIES Item# I.D. O.D. Length 50-23724* 1/ 4" .627" 25' 50-23726* 1/ 4" .627" 50' 50-23727* 5/ 16" .725" 25' 50-23728* 5/ 16" .725" 50' Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F˚ 180 F˚ (-29 C˚ to 82 C˚). TYPE A1-15 LOW PERMEATION FUEL HOSE - 360 SERIES Item# OEM# I.D. O.D. Length 50-23744 MPI # 365-0145 1/ 4" .627" 25' 50-23746 MPI# 365-0146 1/ 4" .627" 50' 50-23747 MPI# 365-0565 5/ 16" .725" 25' 50-23748 MPI# 365-0566 5/ 16" .725" 50' 50-23749 MPI# 365-0385 3/ 8" .658" 25' 50-23751 MPI# 365-0386 3/ 8" .658" 50' 50-23750 MPI# 365-0380 3/ 8" .658" 250' 50-23798 MPI# 365-0383 3/ 8" .75 50' 50-23741 MPI# 365-0125 1/ 2" .890" 25' 50-23743 MPI# 365-0126 1/ 2" .890" 50' 50-23742 365-0120 1/ 2" 890" 250' 50-23799 MPI# 365-0586 5/ 8" 1.00 50' Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C). TYPE A1/B1-15/10 LOW-PERMEATION FUEL HOSE - 365 SERIES Seachoice plated screw clamps have a 5/ 16" or 1/ 2" band and lowprofile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box Suitable for non-corrosive environments only. PLATED SCREW HOSE CLAMPS Item# SAE Size Min Max Band Qty Case 50-23361 4 1/ 4" 5/ 8" 5/ 16" 10 100 50-23363 6 5/ 16" 7/ 8" 5/ 16" 10 100 50-23364 10 1/ 2" 11/ 16" 1/ 2" 10 100 50-23366 12 1/ 2" 11/ 4" 1/ 2" 10 50 50-23367 20 3/ 4" 13/ 4" 1/ 2" 10 50 50-23368 24 1" 2" 1/ 2" 10 50 50-23369 28 11/ 4" 21/ 4" 1/ 2" 10 50 50-23371 36 13/ 4" 23/ 4" 1/ 2" 10 50 50-23373* 48 21/ 2" 31/ 2" 1/ 2" 10 20 50-23374* 58 3" 4" 1/ 2" 10 20 Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. • High-grade stainless steel • 1/ 4" Hex head Sold by the box. STAINLESS-STEEL MINI HOSE CLAMPS Item# SAE Size Min Max Band Qty Case 50-23351 4 1/ 4" 5/ 8" 5/ 16" 10 100 50-23353 5 7/ 16" 11/ 16" 5/ 16" 10 100 50-23354 6 5/ 16" 7/ 8" 5/ 16" 10 100 50-23356 8 3/ 8" 1" 5/ 16" 10 100 50-23357 10 3/ 8" 11/ 16" 5/ 16" 10 100
RkJQdWJsaXNoZXIy MTI2MTky