KEY: BLUE ITEM # = NEW | RED ITEM # = HAZARDOUS | v OVERSIZE | * WHILE SUPPLIES LAST 81 HARDWARE Item# Size Center-to-Center Fastener Case 50-30331c 6" L x 1" W x 11/ 8" H 2" 1/ 4" 12 50-30341c 61/ 8" L x 11/ 3" W x 11/ 4" H 2" 1/ 4" 12 • Modern design • Chrome-plated zinc withstands the rigors of marine conditions • Replacement for select Bayliners • Recommended for boats up to 25' • Tested to ABYC standards OPEN BASE CLEAT 30331 30341 Item# Size Fastener Case 50-30061 41/ 4" #10 12 316 Cast stainless steel. Cleat recesses flush to deck. Four countersunk holes for four fasteners (fasteners not included). Easy to install. Needs 31/ 2" below deck clearance. PULL UP CLEAT - STAINLESS STEEL Item# Size Stud Case 50-30041c 41/ 2" 1/ 4"-20 thread 6 50-30051c 6" 3/ 8"-16 thread 6 Made of 316 stainless steel. Streamline design. 21/ 2" clearance under deck. PULL UP CLEAT WITH STUDS - STAINLESS STEEL Item# Size Eye Case 50-30241 6" x 2" 11/ 8" dia. 10 316 stainless steel. Base diameter: 2" Height: 2". For threaded rod size 5/ 8"-11. Maximum vertical load 4000 lbs. Fasten with #10 screws. If used for overhead lifting, Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed. LIFTING RING / CLEAT - STAINLESS STEEL Item# Eye Case 50-30231c 11/ 2" 10 316 Stainless steel. Tapped for 5/ 8" threaded connecting rod. Maximum vertical load 3000 lbs. If used for overhead lifting, both Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed. LIFTING EYE WITHOUT CLEAT - STAINLESS STEEL Item# Fits Case 50-30201 11/ 4" ID Eyes 12 Made of 304 stainless steel. Adapter plate with 5/ 8" right hand threaded tapping pinion. Bolt fastener center-to-center measures 1.85". For use with Seachoice lifting eyes (30231, 30241) when overhead lifting is required. LIFTING ADAPTER PLATE - STAINLESS STEEL Item# Size Qty Case 50-30190c 5/ 8"-11 x 36" L Bulk 20 For use with Seachoice lifting adapter plate (30201) and choice of lifting eyes (30231 & 30241). 304 Stainless steel. THREADED ROD - STAINLESS STEEL Item# Size Size Fastener Case 50-30351 47/ 16" L x 7/ 8" H 19/ 16" L #10 12 Chrome plated zinc. TIE DOWN CLEAT Durable and non-corrosive. • High-impact solid nylon cleat for use on docks or boats • Comes pre-drilled for easy installation • UV resistant • Open-base designs for use with multiple line sizes Item# Size Center to Center Line Size Fastener Qty Case 50-30800c 41/ 2" L 13/ 16" Up To 5/ 16" 3/ 16" Bulk 10 50-30801c 41/ 2" L 13/ 16" Up To 5/ 16" 3/ 16" 12 50-30820c 6" L 19/ 16" Up To 7/ 16" 1/ 4" Bulk 50 50-30821c 6" L 19/ 16" Up To 7/ 16" 1/ 4" 12 50-30840c 8" L 21/ 4" Up To 5/ 8" 5/ 16" Bulk 10 50-30841c 8" L 21/ 4" Up To 5/ 8" 5/ 16" 12 50-30860c 10" L 31/ 8" Up To 1" 5/ 16" Bulk 10 50-30861c 10" L 31/ 8" Up To 1" 5/ 16" 12 30860 30840 30800 30820 BLACK PLASTIC CLEAT Item# Size Center to Center Fastener Case 50-30301c 51/ 2" L x 11/ 4" H 21/ 8" L: 1" W #10 12 50-30311c 61/ 2" L x 11/ 4" H 25/ 8" L: 1" W 1/ 4" 12 50-30321c 8" L x 13/ 4" H 35/ 8" L: 11/ 2" W 1/ 4" 12 Chrome-plated polished cast brass. • Exceptional corrosion resistance • Maintain shine over time • Open-base designs for use with multiple line sizes HOLLOW BASE YACHT CLEAT Item# Size Center to Center Fastener Case 50-30251c 6" L x 11/ 4" H 21/ 4" L; 13/ 32" W #14 12 50-30261c 8" L x 11/ 2" H 213/ 16" L; 11/ 2" W 1/ 4" 12 50-30271 10" L x 2" H 35/ 8" L; 17/ 8" W 1/ 4" 12 Marine-grade 316 stainless steel for the best corrosion resistance. • Polished mirror finish • Hollow base allows for easy installation onto any deck while securely holding lines in place HOLLOW BASE CLEAT - STAINLESS STEEL Item# Size Center to Center Fastener Case 50-30481 4" L x 3/ 4" H 11/ 2" L; 1" W #10 12 Chrome plated zinc. HOLLOW BASE CLEAT Item# Size Center to Center Fastener Case 50-30561c 41/ 2" L x 3/ 4" H 1.6" L; 1.2" W #8 12 50-30571c 6" L x 7/ 8" H 2.2" L; 1.5" W #8 12 Chrome-plated zinc. • Keeps lines snuggly secured • Polished mirror finish • Easy surface-mount installation HOLLOW BASE CLEAT Item# Size Center to Center Fastener Pkg. Case 50-30580c 4" .85" #10 Bulk 12 50-30600c 6" 1.25" 5/ 16" Bulk 12 50-30610c 8" 1.56" 3/ 8" Bulk 12 50-30620c 10" 2.40" 7/ 16" Bulk 12 50-30630c 12" 3.20" 7/ 16" Bulk 12 Galvanized gray iron. Hot dipped. Suitable for work boats, seawalls and dock use. OPEN BASE DOCK CLEAT Item# Size Center to Center Fastener Case 50-30760 10" 61/ 8" 1/ 2" 24 50-30770 12" 61/ 4" 1/ 2" 12 50-30780 15" 71/ 2" 1/ 2" 6 Tie your boat with the quick, easy and secure "S" shaped dock cleat. The oversized "S" shaped horns are easy to loop and are designed to accept oversized lines. Made from corrosion-resistant aluminum, this well designed cleat features recessed mounting holes to eliminate line snag and fray without sacrificing strength and durability. Mounting hardware not included. CAST ALUMINUM "S" DOCK CLEAT
RkJQdWJsaXNoZXIy MTI2MTky